WE FIX HAND HEATING TUBES ONTO YOUR SUIT

£79.00

This service is on offer for a trail period only. We normally only sell suits with this system fitted onto them.

Book your suit alteration with us online here then roll your suit up, put it in a postal bag with a note of your name address and phone number. Post it by recorded delivery to us at.

Ianovated Ltd, 38 Sandford Way, Dunchurch, Rugby. CV22 6NB. United kingdom. Phone 0044 7530 747234

We will alter your suit and return it to you with in two days of receiving it. The shipping added onto this service at check out is for the return delivery of your altered suit back to you.

See the different suit types below for an illustration of how our system would be fixed onto your suit.

HAND COVERS? Wind and Kite surfers -Don't forget to add them to your order. Your open palm mittens have material between your fingers and the bar, our clear grip hand covers do not.

Category: Tag:

Sailors Tops

If you send us your neoprene top and windproof top layer we will mount the tubes onto the neoprene top and slightly alter the wind proof layer so the tubes can exit behind the neck to loop round over your buoyancy aid.

Standard Wetsuit

For nylon lined suits the rubber moldings that feed the tubes in and out of the suit are glued to the outside of the suit with a small slit cut through the neoprene underneath them.

Smooth Skin Wetsuit

The rubber moldings are that feed the tubes in and out of the suit are glued onto the nylon lining inside the suit if the exterior of the suit is smooth skin.

Dry Suit

It depends on the design of the dry suit how we would alter it for the hand heating tubes. Two examples are shown here. The top suit has a front dry zip and we were able to get the tube exiting the suit at the wrists under the sleeve end. With the bottom example the suit has a back dry zip and the tubes exited the suit at the wrist but were then fed underneath the end of the sleeve sections.

If you want to clarify how we would alter your drysuit please email ismith@ianovated.com with a link to or pictures of your drysuit design.

Front Zip Wetsuit

For nylon lined suits the rubber moldings that feed the tubes in and out of the suit are glued to the outside of the suit with a small slit cut through the neoprene underneath them.